Runco PLASMAWALL PL-50DHD Bedienungsanleitung

OWNER’S OPERATING MANUALPL-43DHDPL-50DHDFlat Panel Display MonitorwithTMand Digital High Denition™ Controller with Vivix II™ Technology

97 DIGITAL RGB (INPUT2) (DVI-D jack) Use to connect a computer (supports HDCP).NOTE: The DHD™ Controller is connected to this input.8 AU

FRONT PANEL1. ON Indicator Lights green when the plasma display is operating. When flashing, the indicator is used to indicate error messages

11DHD™ CONTROLLER DESCRIPTION Front Panel2314 56789101. RUNCO ICON When the Red light is displayed the unit is in Standby, when Blue light is

Rear PanelPb Pr YVideo3IRRS-232 ControlS-Video 1S-Video 2HD1HD212PrRYGPbBRPrGYBPbHVDVI 1 DVI 2DVI OutH/VVHPrRYGPbBHVTRIGGERSRS-232 OutCAUTION: TO RE

13(1) ON/OFFSwitches Power ON/OFF. (This does not operate when POWER/STANDBY indicator of the main unit is off.)(2) IR OUTPUT INDICATORIlluminates wh

Pb Pr YVideo3IRRS-232 ControlS-Video 1S-Video 2HD1HD212PrRYGPbBRPrGYBPbHVDVI 1 DVI 2DVI OutH/VVHPrRYGPbBHVTRIGGERSRS-232 OutCAUTION: TO REDUCE THE RIS

OVERALL FUNCTIONAL DESCRIPTIONDIGITAL INPUTS:• DVI 1 / DVI 2These are High Denition Digital Video Interface (DVI) inputs; Runco recommends using thes

Step I Connection1. Connect the RGBHV cable between the Plasma display and the DHD RGBHV output2. Connect the 9-pin to RJ-11 adapter only to the pla

MENU DESCRIPTION AND NAVIGATIONWhen the MENU button is pressed on either the remote control or the front panel, the main menu will appear on-screen. A

Aspect Ratio provides selection of one of ve aspect ratios: Anamorphic, Standard 4:3, Letterbox, VirtualWide and Cinema. To select an aspect ratio vi

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features and

19While each of the picture quality adjustments can be set to suit the needs of the user, there is a ‘proper’ way to set the adjustments. For setting

20SHARPNESS adjusts the amount of high-frequency detail in the image. This can be adjusted to the preference of the user. Keep in mind that when SHA

ASPECT RATIOS21There are four aspect ratios available that can be selected for video signal inputs.16:9 Screens: • ANAMORPHIC: The image is comp

Baud rate: 19200 (xed)Bits: 8No ParityAll protocol in ASCII formatRS-232 input connector pin numbers: TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5Command

23 RS-232C Commands Command Parameter Value Stored? Description (min/max) POWER

24 Command Parameter Value Stored? Description (min/max) IHPOS? NA NA Returns input horiz

25DIMENSIONSPL-43DHD Plasma

26PL-50DHD Plasma

SPECIFICATIONS27PL-43DHD PL-50DHDNative Resolution:1024 x 768 1280 x 768Screen Size:43 in. (diagonal) 50 in. (diagonal)Screen Aspect Ratio:16:9 16:9Av

Aspect Ratios:Anamorphic, Letterbox, VirtualWide™, 4:3 (on either 16:9 or 4:3 screens)Input Standards:NTSC/PALOutput Resolution:720pOutput:(1) HD- R (

INTRODUCTIONThe PL-43DHD and PL-50DHD are actually a two-piece system - the plasma panel and the DHD™ controller with VivixII™ video processing. The d

P. SET Use for entering a sub-menu when selected by high light.Q. MUTE Used to mute the sound system.R. VOLUME - Used to reduce the vol

RUMA-01090011-2-04 v2.1Runco International • Union City, CA 94587 • Ph: 510-324-7777 • Fax: 510-324-9300 • www.runco.com

WARNINGS AND SAFETY PRECAUTIONSCAUTION:To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of the FCC Rules. These limits

LIMITED WARRANTYIMPORTANT: RUNCO IS NOT RESPONSIBLE FOR IMAGE BURNS ON ANY DISPLAY.PLEASE EXERCISE CAUTION WHEN USING A 4:3 IMAGE ON A 16:9 SCREEN.5Co

6This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not cover normal maintena

OPERATIONThe Runco PL-43DHD and PL-50DHD are a plasma panel systems with the flat panel plasma displays and an external DHD™ controller for video proc

INPUTS AND CONTROLS81 SPEAKER (R) terminal For connection of an external right speaker. Connect a speaker whose impedance is 8 -16 Ω.2 C