Runco CINEWIDETM VX-3000D Spezifikationen PDF herunterladen (Seite 49)

Installation

VX-3000d Series Installation/Operation Manual 33

PRE

IMINAR

Installing the Fixed

CineWide Base Plate

(Prismatic Lens)

To install the fixed CineWide base plate on a VX-3000d/CineWide or

VX-3000d

Ultra/CineWide with a prismatic anamorphic lens:

1. Place the projector upside down on a blanket or other soft surface.

2. For a standard VX-3000d/CineWide that is to be ceiling-mounted: Line up the

four holes on the projector ceiling mounting plate (included with the projector ceiling

mount kit) with those on the bottom of the projector.

3. Line up the two mounting holes on the CineWide base plate with those on the bottom

of the projector (and at the front of the ceiling mount plate, if present).

4. Secure the CineWide base plate (and ceiling mounting plate, if needed) to the

projector with the M6x12mm screws and washers provided with the CineWide lens

base plate. See Figure 3-10.

1. Do not use the mounting screws provided with the ceiling

mounting plate. Use only the hardware provided with the

CineWide lens base plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

3. Washers are not needed to install the base plate on a

VX-3000d

Ultra.

Caution

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 123 124

Keine Kommentare

Runco CINEWIDETM VX-3000D Spezifikationen Seite 49