Runco CL-410 Spezifikationen PDF herunterladen (Seite 20)

The height and width of the projected image can be adjusted to be within the shift

range of the lens by rotating the lens shift dial at the top of the projector

Using the Lens Shift

Connection and Setup









Setting Up The Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve

an optimal image.

Standard Setup (Front Projection)

Place the projector at the required distance from the screen according to the desired

picture size.

90�







Example of a Standard Setup

• The distance from the screen to the projector

depends on the size of the screen.

• The default setting can be used, when placing

the projector in front of the screen. If the

projected image is reversed or inverted, change

the Picture Configuration setting to Front from

the Installation menu. See “Reverse Projection”

on page 23.

• Place the projector so that an imaginary

horizontal line that passes through the center

of the lens is perpendicular to the screen.

Note:

Do not force the lens shift dial beyond

the range of the upper left and lower

right positions. This may cause the

projector to malfunction.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 56 57

Keine Kommentare

Runco CL-410 Spezifikationen Seite 20