Runco CL-810/SDC-1 Spezifikationen PDF herunterladen (Seite 43)

Installation

Runco CL-810 Series Owner’s Operating Manual 31

PRE

IMINAR

Connecting 12-Volt

Trigger Output to External

Theater Equipment

If your CL-810 is equipped with a CineWide with AutoScope system, use the cable

supplied with the AutoScope Lens Motor to connect the motor to the 12-volt trigger

output as shown in

Figure 3-15.

Figure 3-15. Connecting the 12-Volt Trigger Output to the AutoScope Lens Motor

If your home theater contains a retractable screen, screen mask or other 12-volt

trigger-activated equipment, use the cable supplied with the CL-810 to connect it to the

12-volt trigger output as shown in

Figure 3-16.

Figure 3-16. Connecting the 12-Volt Trigger Output to Other Equipment

AutoScope

Lens Motor (Rear)

AC Input

Power

Switch

S-VID /

S-VID

3.5-mm

mini plug

S-VID /

S-VID

to other,

12-volt

trigger-activated equipment

(screen, screen mask etc.)

Red = +12V (Tip)

Black = Ground (Sleeve)

3.5-mm

mini plug

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 91 92

Keine Kommentare

Runco CL-810/SDC-1 Spezifikationen Seite 43