Runco SC-50D Bedienungsanleitung PDF herunterladen (Seite 23)

Controls and Functions

Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual 7

PRE

IMINAR

1. RS232 IN

Connect the RS-232 output from the DHD Controller here, using the provided

RJ11-to-DB9 adapter and communication cable.

2. PWR LED

Lights green to indicate that power is applied and the module is initialized. During

normal operation, always on.

3. 1 - Dual-Link DVI-I Input (Slot 2)

HDCP-compliant digital video input. Connect the HDMI output from the DHD

Controller to this input (see Figure 2-4).

4. Analog LED

Lights briefly when the projector is powered up (self-test). During normal operation,

always off.

5. Digital LED

Lights green to indicate that a valid digital signal from the DHD Controller is present.

6. MAIN POWER SWITCH

Disconnects or applies power to the SC-50d/SC-60d.

7. POWER INPUT (100 to 240 VAC)

Connect the projector to power here.

Use ONLY the AC power cord shipped with the

SC-50d/SC-60d for this purpose (the one with the ferrite

sleeve). Doing otherwise creates a fire hazard risk.

WARNING

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 123 124

Keine Kommentare

Runco SC-50D Bedienungsanleitung Seite 23