Runco VX-3C Spezifikationen PDF herunterladen (Seite 105)

Aspect Ratio allows selection of one of the three aspect ratios provided by the

processor. You have two options for selecting an aspect ratio: First, highlight

ASPECT RATIO on the main menu, then press ENTER. Then select the desired

aspect ratio, and again press ENTER. The second option is to simply press the UP

or DOWN arrows on the remote or front panel. Doing this will toggle you through

the three choices- Anamorphic (16:9), Letterbox and Standard (4:3). For more infor-

mation on aspect ratios, please refer to page 6-16.

Pass-Through Setup: This is only used with screens with masking capability.

When Pass-Through is selected as the source, the screen masking should be set for

the appropriate source. For example, on 4:3 screens, there should be no masking

for computer sources, but Top/Bottom masking should be activated when watching

DTV (anamorphic) sources. You may select either RGB HDTV (anamorphic), YUV

HDTV (anamorphic), or computer (4:3).

6-13

MENU DESCRIPTION AND NAVIGATION

Picture Quality Adjustments

Picture quality adjustments are those that change the various parameters of the

image, such as COLOR (saturation level) and BRIGHTNESS (black level), among

others. Typically, these adjustments should be made only once (during initial calibra-

tion) and then left alone. However, if it is necessary to make any adjustments, per-

form the following procedure:

In the example above, note that COMPOSITE is the active source. This is indicated

by an arrow to the left of the word ‘COMPOSITE’. To make adjustments, highlight

the active source (composite in this case) and press ENTER.

Note:

Pressing ENTER after highlighting a different source will switch you to that

source instead of making picture quality adjustments.

MAIN MENU

COMPOSITE ADJUST

S-VIDEO

COMPONENT

PASS THROUGH

ASPECT RATIO

PASS-THROUGH SETUP

TINT

COLOR

BRIGHTNESS

CONTRAST

SHARPNESS

LUMA ENHANCE

CHROMA ENHANCE

VCR MODE

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 128 129

Keine Kommentare

Runco VX-3C Spezifikationen Seite 105