Runco VX-80d Spezifikationen PDF herunterladen (Seite 43)

• AUTO SOURCE: If checked, (default), the projector can automatically locate this

channel when an incoming input signal matches. If not checked, the projector can locate

the selected channel only when it is directly selected via Channel on the keypad—and

a change in input signal will not result in a channel change.

• LOCKED: If checked, all of the image settings for this channel are disabled. If unchecked

(default), all available image settings can be adjusted as desired. You cannot use Auto

Setup with a locked channel.

• PREVIOUS CHANNEL: Select this option to see or change Channel Edit settings for

the previous channel in the Channel Setup list.

• NEXT CHANNEL: Select this option to see or change Channel Edit settings for the

next channel in the Channel Setup list.

The most commonly used options for image adjustments are accessed through two

menus: Size and Position ( 1 Menu )and Image Settings ( 2 Menu ), both of which appear

in the Main menu. From either of these two menus, you can change settings affecting the

image from the current channel by working with the appropriate slidebars, checkboxes

and pull-down lists. Exit will return to the previous menu (or to the presentation, if from

the Main menu) and accept any changes you may have entered. Settings are saved with

the current channel.

From your presentation, you can access any of the individual options in these menus by

pressing Menu followed by the appropriate two-digit number representing their location

in the menu system. For example, press 2 3 Menu to quickly access the “Gamma” option

in the Image Settings menu.

Note that for certain options, you may prefer to use a “direct key” from presentation level

to go directly to a particular option without traveling through the menu system

(note:

available for certain display parameters only). For example, press Contrast to access the

“contrast” slidebar immediately. Press Exit to return to your presentation.

NOTES: 1) To hide these “direct” slidebars, disable the “Display Slidebars” checkbox in

the Menu Preferences menu. 2) To hide the entire menu system from view, toggle the

on-screen display by pressing OSD .

Use Auto Setup ( Auto )

For a good and efficient first step in perfecting the image, press Auto . This initiates an

automated process in which the projector quickly optimizes critical display parameters

such as size, position, pixel tracking, etc., based on the type of incoming source data

detected. An Auto Setup can save considerable setup time, and you can still modify the

adjustments as desired using menu options described below.

3.5 Adjusting the Image

➤

Before You Begin

Section 3: Operation Section 3: Operation

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 101 102

Keine Kommentare

Runco VX-80d Spezifikationen Seite 43