Runco LightStyle LS-12d Spezifikationen PDF herunterladen (Seite 52)

Installation

36 Runco LS-3/LS-5 Installation/Operation Manual

PRE

IMINAR

4. Then, adjust the anamorphic lens angle so that the projected image is rectangular:

The anamorphic lens will almost always be angled with respect to the projector; this is

normal.

5. When the height and angle are properly set, tighten the Height/Pitch Adjustment

Screws to secure the lens in place.

There may be some pincushion distortion even after the lens is

properly adjusted, especially at shorter throw distances. If this is the

case, Runco recommends that you slightly over-scan the image into

the screen frame area to mask the distortion.

Correct Lens Angle

Incorrect Lens Angle

Note

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 104 105

Keine Kommentare

Runco LightStyle LS-12d Spezifikationen Seite 52