Runco D-73d Ultra Spezifikationen PDF herunterladen (Seite 73)

Installation

D-73d Series Installation/Operation Manual 57

Anamorphic Lens

Installation

D-73d/CineWide - Whitney Anamorphic Lens Installation: The D-73d “Whitney”

Anamorphic lens mount kit consists of everything shown in Figure 3-26. Some

components shipped with your projector may differ slightly from what is shown in these

instructions. If any items are missing or damaged, please contact your Runco dealer or

Runco Customer Service at (800) 23-RUNCO.

Figure 3-26. Whitney Anamorphic Lens Mounting Assembly - Exploded View

1. Remove the two Yaw/X Adjustment Levers and Washers (5) from the bottom of the

Anamorphic Lens Holder (2).

2. Place the Anamorphic Lens Holder on top of (or under, if the projector is inverted)

the CineWide Base Plate. Position the bracket so that the slots at the bottom of the

lens holder are perpendicular to the corresponding slots on the base plate.

3. Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers (4)

and Yaw/X Adjustment Levers that you removed in Step 1.

4. Use the Height/Pitch Adjustment Knobs (3) to attach the Anamorphic Lenses (1) to

the Anamorphic Lens Holder.

To avoid clipping the corners of the image, position the

anamorphic lenses as close as possible to the primary lenses.

Whitney

Anamorphic

Lenses (2x)

Yaw/X-adjustment Lever

and Washer (2x)

Anamorphic Lens

Holder

Height/Pitch

Adjustment

Knobs (4x)

¼-20 Hex Bolt

and Washer (2x)

CineWide Base Plate

for Whitney Lens

Tip

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 151 152

Keine Kommentare

Runco D-73d Ultra Spezifikationen Seite 73