Runco SP-42 Bedienungsanleitung PDF herunterladen (Seite 51)

Operation

Runco CinemaWall SP Series Owner’s Operating Manual 41

PRE

IMINAR

Sub Volume (Installer Adjust mode): Select Sub Volume from the Set-Up menu to

adjust the audio input level for the current source. Do this for all sources, as needed to

prevent sudden, drastic changes in sound volume when switching inputs.

For example, if a DVD player is connected to Input 4, a computer is connected to Input 1

and the audio output of the DVD player is fixed at a much higher level than that of the

computer, reduce the Sub Volume for Input 4.

The Sub Volume control affects the current input only; the front-panel and remote volume

controls are “master” controls; see

Figure 4-7.

Figure 4-7. Audio System Functional Block Diagram

OptionLanguage: Refer to Changing the OSD Language on page 27.

Energy Mode: Select Energy Mode from the Option menu to reduce power

consumption and panel deterioration by limiting brightness of the screen. You can choose

to limit brightness according to the input signal or in response to the ambient light level.

• Select AVERAGE to limit brightness in accordance with the input signal to produce a

bright, easily viewed image.

• Select LEVEL 1 to limit brightness in accordance with the input signal. Power

consumption is less than that used in AVERAGE mode.

• Select LEVEL 2 to limit brightness in accordance with the input signal. Power

consumption is less than that used in LEVEL1 mode.

• Select LEVEL 3 to set the brightness at fixed level, regardless of input signal level

(useful for preventing screen aging due to image burn).

• Select AUTO (Model SP-42), AUTO1 or AUTO2 (Model SP-50/SP-60) to have the

CinemaWall adjust the brightness automatically in response to ambient lighting

conditions, to optimize picture quality.

• To disable the Energy Mode feature, select MUTE.

1 AUDIO INPUT

(INPUT1)

2 AUDIO INPUT

(INPUT2)

3 AUDIO INPUT

(INPUT3)

4 AUDIO INPUT

(INPUT4)

5 AUDIO INPUT

(INPUT5)

INPUT1

SUB VOLUME

INPUT2

SUB VOLUME

INPUT3

SUB VOLUME

INPUT4

SUB VOLUME

INPUT5

SUB VOLUME

INPUT

SELECTOR

POWER

AMPLIFIER

VOLUME

INPUT 3

CINEMAWALL

SCREEN SET-UP OPTION

PICTURE

LANGUAGE : ENGLISH

ENERGY MODE : AUTO

TIME / DATE

PDP MGMT.

AUTO SETUP MODE : OFF

AUTO FUNCTION : OFF

ENTERSET

EXIT

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Runco SP-42 Bedienungsanleitung Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Runco SP-42