Runco SP-42 Bedienungsanleitung PDF herunterladen (Seite 70)

Serial Communications

60 Runco CinemaWall SP Series Owner’s Operating Manual

RELI

INARY

TPM 54 50 4D 000 059 Sets the minute of the present time.

TPTS00 54 50 54 53 30 30 – – Deactivates program timer.

TPTS01 54 50 54 53 30 31 – – Activates program timer.

TPW 54 50 57 001 007 Sets the day of the week of the present

time (001 = Sunday ... 007 = Saturday).

TSMS00 54 53 4D 53 30 30 – – Sets Daylight Saving Time to OFF.

TSMS01 54 53 4D 53 30 31 – – Sets Daylight Saving Time to ON.

PICTURE Menu Commands (Installer Adjust Mode)

BHI 42 48 49 000 255 Adjusts blue gain (highlight).

BLW 42 4C 57 000 255 Adjusts blue offset (lowlight).

BRT 42 52 54 000 255 Adjusts brightness.

CGB 43 47 42 000 060 Adjusts BLUE color detail.

CGC 43 47 43 000 060 Adjusts CYAN color detail.

CGG 43 47 47 000 060 Adjusts GREEN color detail.

CGM 43 47 4D 000 060 Adjusts MAGENTA color detail.

CGR 43 47 52 000 060 Adjusts RED color detail.

CGY 43 47 59 000 060 Adjusts YELLOW color detail.

CNT 43 4E 54 000 255 Adjusts contrast.

COL 43 4F 4C 000 127 Adjusts color intensity.

ENH 45 4E 48 000 015 Adjusts H. SHARPEN.

ENV 45 4E 56 000 015 Adjusts V. SHARPEN.

GHI 47 48 49 000 255 Adjusts green gain (highlight).

GLW 47 4C 57 000 255 Adjusts green offset (lowlight).

GRAS18 47 52 41 53 31 38 – – Sets the GAMMA to 1.8.

GRAS19 47 52 41 53 31 39 – – Sets the GAMMA to 1.9.

GRAS20 47 52 41 53 32 30 – – Sets the GAMMA to 2.0.

GRAS21 47 52 41 53 32 31 – – Sets the GAMMA to 2.1.

GRAS22 47 52 41 53 32 32 – – Sets the GAMMA to 2.2.

GRAS23 47 52 41 53 32 33 – – Sets the GAMMA to 2.3.

Table 6-1. Serial Commands (continued)

Command Value Range

Description

ASCII HEX Minimum Maximum

Notes:

1. When making input-specific adjustments such as to image quality, screen position/size or audio

sub-volume, select the input you wish to affect before making such adjustments.

2. These settings are not stored in memory.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

Keine Kommentare

Runco SP-42 Bedienungsanleitung Seite 70