Runco REFLECTION Spezifikationen PDF herunterladen (Seite 68)

Operation

56 Runco RS-1100 Series Owner’s Operating Manual

PRE

IMINAR

Gamma Selection: The normal gamma setting of 2.2 is correct for almost all signals and

conditions. If excess ambient light washes out the image and it becomes difficult or

impossible to see details in dark areas, lower the gamma setting to compensate. This will

improve contrast while maintaining good details for blacks. Conversely, if the image is

washed out and unnatural, with excessive detail in black areas, increase the setting.

Again, good gamma improves contrast while maintaining good details for blacks and

whites.

SD Enhance: The SD Enhance menu gives you options for improving the quality of

standard-definition, 480i images. (For 480p and higher-definition images, the controls in

this menu are disabled.) Keep in mind that these controls add frequencies that are not

present in the original signal, and may make images appear “noisy” if misused.

• H Enhance/V Enhance: These controls can improve the apparent horizontal and/or

vertical resolution of the image.

• Chroma Enhance: This control adds chroma (color information) to the input signal

and can make colors appear more vibrant and saturated.

• H Threshold/V Threshold/Chroma Threshold: Set these to +11 or higher to

activate the enhancement controls described above. Generally, the higher the

threshold, the more noticeable the enhancements you make will be.

RVR Adjust: Use the RVR Adjust control to increase or decrease the Reflectance Volume

Regulation setting. RVR lets you control the aperture or iris size (the physical opening

through the lens; similar to an “f-stop” on a camera). Doing so allows you to optimize

brightness and contrast according to the amount of ambient light in the viewing area.

Use a higher setting for rooms with lots of ambient light. Use a lower setting for more

“theater-like” viewing conditions (little or no ambient light).

HDTV Adjust: Use the controls in the HDTV Adj. sub-menu to improve the display of

high-definition source material. These controls allow you to make adjustments

independently for each HD signal type (as opposed to the per-input controls in the

Picture

Adjustment menu).

Analog RGBHV

Analog YPbPr

Signal Fine Tune

Downloaded From projector-manual.com Runco Manuals

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

Keine Kommentare

Runco REFLECTION Spezifikationen Seite 68