Runco REFLECTION Spezifikationen PDF herunterladen (Seite 75)

Operation

Runco RS-1100 Series Owner’s Operating Manual 63

PRE

IMINAR

Store Settings: For each input, the RS-1100 lets you store image quality settings as

presets that you can recall at a later time. You can create up to three presets per input

and resolution.

To store image quality settings to a preset:

1. Select Picture Adjust from the ISF Calibration menu.

2. Select Color Temperature from the Picture Adjust menu.

3. Use the or button to select the “Custom 1” or “Custom 2” color temperature.

Make a note of your selection.

4. Press EXIT.

5. Adjust brightness and contrast as described in the Picture Adjustment section

(page 46). Exit the Picture Adjust menu when finished.

6. Select White Balance from the ISF Calibration menu. Adjust the grayscale as required

(refer to

White Balance on page 55).

7. From the White Balance menu, select “Store Custom 1” or “Store Custom 2”

(depending on your selection in Step 3) and press ENTER.

8. From the ISF Calibration menu, select Store Settings and choose the "Memory 1,”

“ISF Night” or “ISF Day” preset to store your settings.

9. Repeat Steps 1 through 8 for the other two presets.

To recall stored custom image quality settings, select Restore Image Settings from the

Adjustment menu (refer to

Picture Adjustment on page 46) and choose “Memory 1,”

“ISF Night” or “ISF Day.” Or, simply use the corresponding buttons on the remote control.

Splash Screen Timer: Use the or button to set the Splash Screen Timer. This timer

controls how long the startup (ISF and Runco logo) image stays on-screen after you turn

on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished,

press EXIT.

ISF Enable: Use ISF Enable to control the display of the ISF logo on the RS-1100 splash

screen upon power-up.

Return to User OSD: To exit the ISF Calibration menu, use the up- or down-arrow keys

to highlight Return to User OSD and press ENTER.

To return to the ISF Calibration menu, select it from the Main Menu, press ENTER twice,

then press MENU on the remote control. (You do not need to re-enter the passcode.)

When you change a setting, save the change to a preset

afterwards. Otherwise, the change will be lost when a different

input is selected. (Most settings are saved for each input and

resolution separately.)

The first time you perform this procedure, store the current white

balance settings in both the “Custom

1” and “Custom 2” color

temperatures. This will give you a convenient starting point for

Custom

2, should you wish to use it for the other two presets.

Note

Tip

Downloaded From projector-manual.com Runco Manuals

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Runco REFLECTION Spezifikationen Seite 75

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Runco REFLECTION