Runco RS-900 CineWide Bedienungshandbuch PDF herunterladen (Seite 42)

Installation

26 RS-900 and RS1100 Series Installation/Operation Manual

PRE

IMINAR

Installing the Fixed

CineWide Base Plate

(Prismatic Lens)

To install the fixed CineWide base plate on an RS-900/CineWide, RS1100/CineWide or

RS1100

Ultra/CineWide with a prismatic anamorphic lens:

1. Place the projector upside down on a blanket or other soft surface.

2. For a standard RS-900/CineWide or RS1100/CineWide that is to be

ceiling-mounted: Line up the four holes on the projector ceiling mounting plate

(included with the projector ceiling mount kit) with those on the bottom of the

projector.

3. Line up the two mounting holes on the CineWide base plate with those on the bottom

of the projector (and at the front of the ceiling mount plate, if present).

4. Secure the CineWide base plate (and ceiling mounting plate, if needed) to the

projector with the M6x12mm screws and washers provided with the CineWide lens

base plate. See Figure 3-10.

➤

1. Do not use the mounting screws provided with the ceiling

mounting plate. Use only the hardware provided with the

CineWide lens base plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

3. Washers are not needed to install the base plate on an

RS1100

Ultra.

Caution

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 103 104

Keine Kommentare

Runco RS-900 CineWide Bedienungshandbuch Seite 42