Runco RS-900 CineWide Bedienungshandbuch PDF herunterladen (Seite 56)

Installation

40 RS-900 and RS1100 Series Installation/Operation Manual

PRE

IMINAR

Cylindrical Anamorphic

Lens Installation and

Adjustment

The Cylindrical Anamorphic lens mount kit consists of everything shown in Figure 3-20.

Some components shipped with your projector may differ slightly from what is shown in

these instructions.

Figure 3-20. Cylindrical Anamorphic Lens Mounting Assembly - Exploded View

Attaching Lens Mounting Assembly to Lens Motor Carriage Plate or Fixed

CineWide Base Plate:

1. Remove the two Yaw/X Adjustment Levers (item #8) from the bottom of the

Anamorphic Lens Holder (item #5).

2. Place the Anamorphic Lens Holder on top of the AutoScope Carriage Plate or Fixed

CineWide Base Plate (item #7). Position the bracket so that the long slot at the bottom

of the lens holder is perpendicular to the corresponding slots on the plate.

3. Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers

(item

#6) and Yaw/X Adjustment Levers that you removed in Step 1.

4. Use the Lens Mounting Screws to attach the Lens Adapter Ring (item #1) to the Pitch

Adjustment Yoke (item #2); see

Figure 3-21. (Use the round, threaded holes on the

yoke.)

➤

Pitch Adjustment Yoke for Lens

Height/Y Adjustment

T-Screw and Washer

(2x)

T-Screw and

Washer (2x)

Pitch Adjustment

Anamorphic Lens

Holder

1/4-20 Hex Bolt (2x)

and Washer (2x)

AutoScope Carriage Plate or

Fixed CineWide Base Plate

Yaw/X Adjustment

Lever (2x)

Lens Adapter Ring and

Mounting Screws (3x)

Pitch Adjustment

T-Nut (2x)

Anamorphic Lens

Set Screw

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Kommentare zu diesen Handbüchern

Keine Kommentare

Runco RS-900 CineWide Bedienungshandbuch Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Runco RS-900 CineWide