Runco RS-900 CineWide Bedienungshandbuch PDF herunterladen (Seite 69)

Operation

RS-900 and RS1100 Series Installation/Operation Manual 53

PRE

IMINAR

Picture Memory: For each input, the RS-900/RS1100 lets you store picture quality

settings as presets that you can recall at a later time. You can create up to four presets

per input and resolution, to accommodate changing lighting conditions or viewer

preferences.

To select a picture memory preset, highlight Picture Memory in the Picture Adjust menu.

Then, press or to select “Custom 1,” “Custom 2,” “ISF Night” or “ISF Day.” When

you select “Custom 1” or “Custom 2,” any changes to picture quality settings are stored in

the selected preset.

Copy Settings: When you select the “Custom 1” or “Custom 2” Picture Memory preset,

you can copy the settings from another preset to the selected preset. This gives you a

convenient starting point for creating a new, custom preset. To do this, select

Copy

Settings from the Picture Adjust menu and press . Then, choose “Custom 1,”

“Custom 2,” “ISF Night” or “ISF Day.”

Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an

acronym for “Picture Line-Up Generation Equipment.”)

Figure 4-2 shows a typical PLUGE

pattern.

Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness

PLUGE patterns vary but generally consist of some combination of black, white and gray

areas against a black background. The example above includes two vertical bars and four

shaded boxes.

1. To store changes to the ISF Night or ISF Day Picture Memory

preset, select that Picture Memory in the ISF menu (refer to ISF

on page 65). You must enter a passcode to access the ISF

menu.

2. The Picture Memory selection you make here is not retained

when the projector is powered off, then on again. To specify

which

Picture Memory should take effect when the projector is

powered on, select it in the ISF menu.

To copy changes to the ISF Night or ISF Day Picture Memory

preset, select that Picture Memory in the ISF menu (refer to ISF on

page 65). You must enter a passcode to access the ISF

menu.

Note

Below Black

bove Black

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 103 104

Keine Kommentare

Runco RS-900 CineWide Bedienungshandbuch Seite 69